API 510 / 570 In-service inspection (API 510/570) practice questions
10 free questions with answers and explanations. Try each one, then tap “Show answer”.
- Calculations
1. ASME VIII Div. 1 hydrotest: MAWP 250 psi, stress ratio 1.15. What is the minimum test pressure? (1.3 × MAWP × stress ratio)
- A. 373.7 psi
- B. 275 psi
- C. 325 psi
- D. 431.2 psi
Show answer
Answer: A. 373.7 psi
1.3 × 250 × 1.15 = 373.7 psi.
- Damage
2. Corrosion caused by bacteria is called
- A. creep
- B. erosion
- C. sulfidation
- D. microbiologically influenced corrosion (MIC)
Show answer
Answer: D. microbiologically influenced corrosion (MIC)
Common in water systems and tank bottoms.
- Calculations
3. 2:1 ellipsoidal head: P = 250 psi, inside diameter D = 60 in, S = 20,000 psi, E = 1. Find t using t = PD ÷ (2SE − 0.2P).
- A. 0.45 in
- B. 0.188 in
- C. 0.375 in
- D. 0.756 in
Show answer
Answer: C. 0.375 in
t = 250 × 60 ÷ (2 × 20000 × 1 − 0.2 × 250) = 0.375 in.
- Calculations
4. A CML read 19 mm 4 years ago and 17.5 mm today. What is the corrosion rate?
- A. 4.375 mm/yr
- B. 6 mm/yr
- C. 0.188 mm/yr
- D. 0.375 mm/yr
Show answer
Answer: D. 0.375 mm/yr
Corrosion rate = (19 − 17.5) ÷ 4 = 0.375 mm/yr.
- Testing
5. For ASME VIII Div. 1 vessels, the standard hydrotest pressure is
- A. 1.1 × MAWP
- B. 1.5 × design pressure always
- C. 1.3 × MAWP × stress ratio
- D. 2 × MAWP
Show answer
Answer: C. 1.3 × MAWP × stress ratio
Stress ratio = allowable stress at test temperature ÷ at design temperature.
- Repairs
6. Temporary repairs such as leak clamps should be
- A. removed immediately while in service
- B. painted over
- C. replaced with permanent repairs at the next suitable opportunity
- D. left forever
Show answer
Answer: C. replaced with permanent repairs at the next suitable opportunity
The inspector must approve temporary repairs.
- Piping
7. Most on-site process piping in a refinery is typically
- A. Class 3
- B. Class 1
- C. Class 2
- D. Class 4
Show answer
Answer: C. Class 2
Class 1 covers the highest-consequence services.
- Calculations
8. ASME VIII Div. 1 hydrotest: MAWP 300 psi, stress ratio 1.07. What is the minimum test pressure? (1.3 × MAWP × stress ratio)
- A. 390 psi
- B. 481.5 psi
- C. 330 psi
- D. 417.3 psi
Show answer
Answer: D. 417.3 psi
1.3 × 300 × 1.07 = 417.3 psi.
- Calculations
9. ASME VIII Div. 1 pneumatic test: MAWP 150 psi, stress ratio 1.1. Minimum test pressure? (1.1 × MAWP × stress ratio)
- A. 181.5 psi
- B. 214.5 psi
- C. 225 psi
- D. 165 psi
Show answer
Answer: A. 181.5 psi
1.1 × 150 × 1.1 = 181.5 psi.
- Calculations
10. Actual thickness 13.6 mm, required thickness 10 mm, corrosion rate 0.4 mm/yr. What is the remaining life?
- A. 9 years
- B. 34 years
- C. 4.5 years
- D. 1.44 years
Show answer
Answer: A. 9 years
Remaining life = (13.6 − 10) ÷ 0.4 = 9 years.
Get fresh questions every day, focused on your weak topics, plus timed mock tests. Free to start.
Practise free in the web app Practise on TelegramAbout the API 510 / 570 on Mock Night · Original practice questions; not affiliated with the exam board.