12,900+ practice questions · 144 exams · new questions added every week
Practice questions › Oil & gas › Drilling & production

Oil & gas Drilling & production practice questions

10 free questions with answers and explanations. Try each one, then tap “Show answer”.

  1. Production

    1. Wax deposition in pipelines is mainly caused by

    • A. high pressure only
    • B. too much gas
    • C. the oil cooling below its wax appearance temperature
    • D. H₂S
    Show answer

    Answer: C. the oil cooling below its wax appearance temperature

    Insulation, heating and pigging control wax.

  2. Reservoir

    2. Water injection in a field is mainly used to

    • A. clean the pipelines
    • B. maintain reservoir pressure and push oil towards producing wells
    • C. make crude heavier
    • D. cool the rig
    Show answer

    Answer: B. maintain reservoir pressure and push oil towards producing wells

    It is a common secondary recovery method.

  3. Calculations

    3. What is the capacity of a pipe with an inside diameter of 8.535 in? (bbl/ft = ID² ÷ 1029.4)

    • A. 0.0083 bbl/ft
    • B. 0.0166 bbl/ft
    • C. 0.232 bbl/ft
    • D. 0.0708 bbl/ft
    Show answer

    Answer: D. 0.0708 bbl/ft

    8.535² ÷ 1029.4 = 0.0708 bbl/ft.

  4. Rigs

    4. Which rig type stands on legs resting on the seabed in shallow water?

    • A. Jack-up
    • B. Land rig
    • C. Semi-submersible
    • D. Drillship
    Show answer

    Answer: A. Jack-up

    Jack-ups are limited by water depth.

  5. Drilling

    5. Lost circulation means

    • A. the mud pumps have failed
    • B. drilling mud is flowing into the formation instead of returning
    • C. the drill string is stuck
    • D. gas is flowing into the well
    Show answer

    Answer: B. drilling mud is flowing into the formation instead of returning

    It can reduce hydrostatic pressure and lead to a kick.

  6. Calculations

    6. What is the pressure gradient of 9.6 ppg mud? (gradient = 0.052 × MW)

    • A. 184.6 psi/ft
    • B. 0.499 psi/ft
    • C. 4.157 psi/ft
    • D. 0.148 psi/ft
    Show answer

    Answer: B. 0.499 psi/ft

    0.052 × 9.6 = 0.499 psi/ft.

  7. Calculations

    7. The drill string holds 100 bbl and the pump output is 0.2 bbl/stroke. How many strokes to pump from surface to bit?

    • A. 20 strokes
    • B. 250 strokes
    • C. 600 strokes
    • D. 500 strokes
    Show answer

    Answer: D. 500 strokes

    100 ÷ 0.2 = 500 strokes.

  8. Logging

    8. High resistivity in a porous zone often indicates

    • A. a stuck pipe
    • B. more shale
    • C. hydrocarbons rather than salty water
    • D. lost circulation
    Show answer

    Answer: C. hydrocarbons rather than salty water

    Salt water conducts electricity well.

  9. Rigs

    9. Which rig type is best suited to ultra-deep water?

    • A. Drillship
    • B. Jack-up
    • C. Swamp barge
    • D. Land rig
    Show answer

    Answer: A. Drillship

    Drillships and semi-submersibles use dynamic positioning or moorings.

  10. Calculations

    10. The drill string holds 60 bbl and the pump output is 0.15 bbl/stroke. How many strokes to pump from surface to bit?

    • A. 9 strokes
    • B. 200 strokes
    • C. 500 strokes
    • D. 400 strokes
    Show answer

    Answer: D. 400 strokes

    60 ÷ 0.15 = 400 strokes.

Want more Oil & gas Drilling & production questions?

Get fresh questions every day, focused on your weak topics, plus timed mock tests. Free to start.

Practise free in the web app Practise on Telegram

More Oil & gas practice

About the Oil & gas on Mock Night · Original practice questions; not affiliated with the exam board.