12,900+ practice questions · 144 exams · new questions added every week
Practice questions › Oil & gas › Oil & gas HSE essentials

Oil & gas Oil & gas HSE essentials practice questions

10 free questions with answers and explanations. Try each one, then tap “Show answer”.

  1. H2S

    1. Which breathing apparatus is used to work in an H₂S atmosphere?

    • A. Self-contained breathing apparatus (SCBA) or airline set
    • B. A surgical mask
    • C. A dust mask
    • D. A filter mask with any cartridge
    Show answer

    Answer: A. Self-contained breathing apparatus (SCBA) or airline set

    Escape sets are for escape only, not for work.

  2. Culture

    2. Who can use Stop Work Authority?

    • A. Only the site manager
    • B. Only HSE officers
    • C. Anyone on site who sees unsafe work
    • D. Only the client
    Show answer

    Answer: C. Anyone on site who sees unsafe work

    Stopping unsafe work should never lead to blame.

  3. H2S

    3. Why is smell NOT a safe way to detect H₂S?

    • A. High concentrations paralyse the sense of smell
    • B. H₂S has no smell
    • C. It only smells when wet
    • D. It smells pleasant
    Show answer

    Answer: A. High concentrations paralyse the sense of smell

    Always rely on calibrated gas detectors.

  4. Emergency

    4. The recommended rate of chest compressions in adult CPR is

    • A. 200 per minute
    • B. 60 per minute
    • C. 100–120 per minute
    • D. 30–40 per minute
    Show answer

    Answer: C. 100–120 per minute

    Push hard and fast in the centre of the chest.

  5. Permits

    5. What is the purpose of a permit-to-work system?

    • A. To book holidays
    • B. To pay contractors
    • C. To record attendance
    • D. To control high-risk work through formal checks and authorisation
    Show answer

    Answer: D. To control high-risk work through formal checks and authorisation

    Hot work and confined-space entry need permits.

  6. Isolation

    6. After applying locks under LOTO, you should

    • A. remove the tags
    • B. give your key to a colleague
    • C. verify zero energy (try to start it) before work
    • D. start work immediately
    Show answer

    Answer: C. verify zero energy (try to start it) before work

    Isolation is only proven once tested.

  7. Fire

    7. Under the UK/European classification, a fire involving flammable liquids is

    • A. Class D
    • B. Class C
    • C. Class A
    • D. Class B
    Show answer

    Answer: D. Class B

    Class A is solids, C is gases, D is metals, F is cooking oils.

  8. Gas testing

    8. What does LEL stand for?

    • A. Lower Explosive Limit
    • B. Limited Entry Level
    • C. Level of Emergency Leakage
    • D. Lowest Exposure Level
    Show answer

    Answer: A. Lower Explosive Limit

    Below the LEL, there is too little gas to ignite.

  9. Fire

    9. For a gas-fed (Class C) fire, the first priority is usually to

    • A. use a wet chemical extinguisher
    • B. spray water on it immediately
    • C. isolate the gas supply
    • D. cover it with a blanket
    Show answer

    Answer: C. isolate the gas supply

    Extinguishing without isolating can leave an explosive gas cloud.

  10. H2S

    10. Besides being toxic, H₂S is also

    • A. flammable
    • B. inert
    • C. harmless in small rooms
    • D. an oxidiser only
    Show answer

    Answer: A. flammable

    It can form explosive mixtures with air.

Want more Oil & gas Oil & gas HSE essentials questions?

Get fresh questions every day, focused on your weak topics, plus timed mock tests. Free to start.

Practise free in the web app Practise on Telegram

More Oil & gas practice

About the Oil & gas on Mock Night · Original practice questions; not affiliated with the exam board.