Welding inspector NDT general theory practice questions
10 free questions with answers and explanations. Try each one, then tap “Show answer”.
- Welds
1. The area of base metal whose structure was changed by welding heat is the
- A. cap
- B. fusion face
- C. root
- D. heat-affected zone (HAZ)
Show answer
Answer: D. heat-affected zone (HAZ)
The HAZ was not melted but its properties changed.
- Certification
2. Under ISO 9712, which level sets up equipment, carries out tests and interprets results against standards?
- A. Level 3
- B. Level 1
- C. Trainee
- D. Level 2
Show answer
Answer: D. Level 2
Level 1 works under supervision; Level 3 writes and approves procedures.
- Methods
3. Which methods suit surface cracks in austenitic stainless steel?
- A. Magnetic particle testing
- B. Magnetic flux leakage
- C. Gamma radiography only
- D. Penetrant or eddy current testing
Show answer
Answer: D. Penetrant or eddy current testing
Austenitic stainless steel is non-magnetic.
- Certification
4. Which level is responsible for establishing techniques and approving written procedures?
- A. Level 2
- B. Any trainee
- C. Level 3
- D. Level 1
Show answer
Answer: C. Level 3
Level 3 also oversees qualification of lower levels.
- Methods
5. Which method can only detect discontinuities that are open to the surface?
- A. Radiographic testing (RT)
- B. Penetrant testing (PT)
- C. Magnetic particle testing (MT)
- D. Ultrasonic testing (UT)
Show answer
Answer: B. Penetrant testing (PT)
MT can also find some slightly subsurface defects.
- Certification
6. Under ISO 9712, who may write NDT instructions based on a procedure?
- A. Level 2
- B. Nobody — only Level 3
- C. Trainees
- D. Level 1
Show answer
Answer: A. Level 2
Level 3 writes and approves procedures.
- Welds
7. Which weld defect is generally considered the most serious?
- A. Cracks
- B. Slight excess reinforcement
- C. Spatter
- D. Porosity
Show answer
Answer: A. Cracks
Cracks are planar and can grow under stress.
- Codes
8. ASME Section V covers
- A. acceptance criteria for all pressure vessels
- B. welder qualification
- C. pipeline design
- D. NDT methods and techniques
Show answer
Answer: D. NDT methods and techniques
Acceptance criteria usually come from the construction code.
- Codes
9. Which code is widely used for welding of oil and gas pipelines?
- A. BS 7671
- B. AWS D1.1
- C. API 1104
- D. ASME Section IX only
Show answer
Answer: C. API 1104
API 1104 covers pipeline welding and its inspection.
- Methods
10. Which NDT method uses a pressure difference or tracer gas to find through-wall leaks?
- A. Visual testing
- B. Leak testing (LT)
- C. Penetrant testing
- D. Magnetic particle testing
Show answer
Answer: B. Leak testing (LT)
Bubble and helium leak tests are examples.
Get fresh questions every day, focused on your weak topics, plus timed mock tests. Free to start.
Practise free in the web app Practise on TelegramMore Welding inspector practice
About the Welding inspector on Mock Night · Original practice questions; not affiliated with the exam board.