NDT NDT general theory practice questions
10 free questions with answers and explanations. Try each one, then tap “Show answer”.
- Welds
1. Which weld defect is generally considered the most serious?
- A. Cracks
- B. Slight excess reinforcement
- C. Spatter
- D. Porosity
Show answer
Answer: A. Cracks
Cracks are planar and can grow under stress.
- Codes
2. ASME Section V covers
- A. acceptance criteria for all pressure vessels
- B. welder qualification
- C. pipeline design
- D. NDT methods and techniques
Show answer
Answer: D. NDT methods and techniques
Acceptance criteria usually come from the construction code.
- Codes
3. Which code is widely used for welding of oil and gas pipelines?
- A. BS 7671
- B. AWS D1.1
- C. API 1104
- D. ASME Section IX only
Show answer
Answer: C. API 1104
API 1104 covers pipeline welding and its inspection.
- Methods
4. Which NDT method uses a pressure difference or tracer gas to find through-wall leaks?
- A. Visual testing
- B. Leak testing (LT)
- C. Penetrant testing
- D. Magnetic particle testing
Show answer
Answer: B. Leak testing (LT)
Bubble and helium leak tests are examples.
- Methods
5. Infrared thermography detects defects using
- A. radiation film
- B. iron particles
- C. differences in surface temperature
- D. sound waves
Show answer
Answer: C. differences in surface temperature
Used for electrical hot spots and insulation problems.
- Defects
6. A star-shaped crack at the end of a weld run is a
- A. cold shut
- B. lap
- C. crater crack
- D. lamination
Show answer
Answer: C. crater crack
Fill the crater to prevent it.
- Certification
7. How often must certified ISO 9712 personnel have their vision checked?
- A. Only once, before the first exam
- B. Every year
- C. Every 5 years
- D. Every 10 years
Show answer
Answer: B. Every year
Near-vision acuity and colour vision are checked.
- Welds
8. A groove melted into the base metal at the weld toe and left unfilled is
- A. undercut
- B. incomplete penetration
- C. overlap
- D. porosity
Show answer
Answer: A. undercut
Undercut reduces the section and concentrates stress.
- Basics
9. What is the main advantage of NDT over destructive testing?
- A. It is always cheaper
- B. It needs no trained staff
- C. It finds every possible defect
- D. The part can still be used after testing
Show answer
Answer: D. The part can still be used after testing
NDT inspects without damaging the item.
- Welds
10. Non-metallic material trapped in a weld from the flux is called
- A. slag inclusion
- B. lamination
- C. undercut
- D. porosity
Show answer
Answer: A. slag inclusion
Poor cleaning between passes is a common cause.
Get fresh questions every day, focused on your weak topics, plus timed mock tests. Free to start.
Practise free in the web app Practise on TelegramMore NDT practice
About the NDT on Mock Night · Original practice questions; not affiliated with the exam board.